1, Central air conditioner outdoor and indoor units are put among the bushes, the positioning of indoor unit options: should be thought about when installing the machine tall and length and width of the channel directly into room and avoid shouldn't be installed. Have a very good air condition and air distribution, air conditioning also to make room from a large area can certainly be cold (warm) air blown each and every corners of this room.
Air conditioning beyond heat as well as put of harmful gases, therefore the will need to avoid sunshine.
Unit installation location should've adequate inspection and maintenance space. Within indoor unit installation method install within the wall, this unit left face-to-face with at minimum 1m, so leave certainly 0.5m, leaving the top certainly 0.3m space for air supply and air supply fan furnace filter maintenance devices used.
2, the indoor unit being as near towards the power, and judge between outdoor and indoor unit exactly where the nearest installation, fan coil it saves the pipeline.
Heavier outdoor unit must be set up in buildings where solid, can be placed on your balcony, your window special steel or concrete pedestal. Open place, they will likely put in place a sunshade rain cover, and will cut strong wind blowing straight unit air vents, heat affected unit out, the way in which may be to wind machine around the exhaust vent and placed at 90 degrees.
So you can have enough outdoor unit maintenance, installation and operation using the installation space, for possible off of other buildings, as well as to prevent the obstruction of air convection cooling effect.
Because cabinet air conditioning unit power, when ever the noise is big, before the installation location must also consider the harassment does not affect the inside instead of around the houses adjacent factors.
Indoor unit may be fixed with anchor bolts to the concrete floor units. Sometimes, so as not to clean ground level, it gets wet, or mop the land, sweeping the floor board, beneath Ministry of the shell scratched, dirty, can be achieved inside the unit below a thickness of 60-100mm wooden base, is going to be fixed in the base unit.
Wooden base of the length, width and size ought to be such as or slightly larger than the bottom of the air conditioner size.
Installation, the main fixed wooden base, and then also fixed with the wooden base machine.
For the indoor unit is really a slender-shaped closet, improper installation, easily forward dumping, and the installation should take measures to avoid fall.
Before anti-dumping measures two units: one at the top of the console prior to when the goods with anti-iron rectangular-shaped anchors, anchor fixed to your casing at the top side in the plane, at right angles on the other side belonging to the wall fixed. Second, the less these units placed in the cargo down through the floor fixture. The precise spread of which method, whether visual base unit, generally use a base unit installed, used the very first approach. On the unit measures against goods shown in Figure 5.
Install the outdoor unit for being solid.
3, the indoor and outdoor units are fixed, the refrigerant usually are connected with pipes and drains. Split air conditioner cabinet back or bottom with the unit left and right sides from the hole left channel leads are often selected as stated by different needs. Pipe joints what the chassis, as a result the operation can be difficult.
Split cabinet air conditioner refrigerant pipe joints, both with quick connector is connected with another reference to the flare nut fitting (flare nut fitting style of operation, installing split hvac in the back of the technical details in the description). In the cabinet ac unit pipe connection could possibly be the employing quick connectors, their operation and then in front belonging to the dressing method can turn to the practice.
Pair of cabinet ac units indoor plastic drain hose, with units within the water tray drain port connection to the nozzle cement and wrapped by using a bandage with good.
Any exposed pipes around the interior, exterior drainage pipes must really be engrossed in insulation to stop dew condensation because of the outdoors air into, air conditioning vents contributing to water dripping phenomenon.