1, Smoke fire damper indoor and outdoor units are put on a lawn, the area of indoor unit options: might be of interest when installing the product in height and size of the channel into your room to prevent yourself from cannot installed. Have a good air condition and air distribution, air conditioning and then make room for a large area is cold (warm) air blown to any or all corners of an room.
Air conditioning equipment can removed from heat and incorporate of harmful gases, and in addition the need to avoid sunlight.
Unit installation location really should have adequate inspection and maintenance space. With the indoor unit installation remedy to install into the wall, in addition to left face-to-face with at the very least 1m, so leave in any case 0.5m, leaving the top of more than 0.3m space for air supply and air supply fan air conditioning filter maintenance devices used.
2, the indoor unit as being as close toward the power supply, and choose between outdoor and indoor unit while the nearest installation, it saves the pipeline.
Heavier outdoor unit need to be established in buildings where solid, can be placed across the balcony, your window special steel or concrete pedestal. Open place, proper arranged a sunshade rain cover, and will characteristics strong wind blowing straight unit air vents, heat affected unit out, the simplest way is to wind this unit at the exhaust vent and placed at 90 degrees.
So as to have adequate outdoor unit maintenance, installation and operation inside the installation space, wherever possible beyond other buildings, in order to avoid the obstruction of air convection cooling effect.
Because cabinet air conditioner power, whenever the noise is large, therefore, the installation location also need to go through the harassment does not affect the lining without close to the houses adjacent factors.
Indoor unit may very well be fixed with anchor bolts for that concrete floor units. Sometimes, so as not to scrub the garden soil, the ac unit gets wet, or mop the bottom, sweeping a floor board, inside the Ministry of the shell scratched, dirty, may be accomplished at the unit below a thickness of 60-100mm wooden base, will be fixed inside of the base unit.
Wooden bottom of the length, width and size is generally akin to or slightly larger than the bottom of the gps watch size.
Installation, your initial fixed wooden base, and then suddenly fixed in direction of the wooden base machine.
Simply because indoor unit can be described as slender-shaped closet, improper installation, easily forward dumping, so your installation should take measures to forestall fall.
Before anti-dumping measures two units: one at the peak of these devices prior to a goods with anti-iron rectangular-shaped anchors, anchor fixed at the casing on the top bar side of the plane, at right angles off and away to lack of within the wall fixed. Second, the base the console is actually a the cargo down to the floor fixture. Your number of which method, whether visual base unit, generally operate using the base unit installed, used the very first approach. Down the unit measures against goods shown in Figure 5.
Install the outdoor unit to always be solid.
3, Cabinet air conditioner the outdoor and indoor units are fixed, the refrigerant is linked with pipes and drains. Split air conditioning equipment cabinet back or bottom of this unit left and right sides of your hole left channel leads could possibly be selected consistent with different needs. Pipe joints big the chassis, now the operation can be difficult.
Split cabinet air conditioning refrigerant pipe joints, both with quick connector is attached to another relationship with the flare nut fitting (flare nut fitting method for operation, installing of split ac unit at the rear of the technical details within your description). Should your cabinet air conditioning pipe connection is most likely the entry to quick connectors, their operation during front of this dressing method can take a look at the practice.
List of cabinet air conditioning equipment can indoor plastic drain hose, with units in the water tray drain port connection to the nozzle cement and wrapped using bandage with good.
Any exposed pipes around the interior, exterior drainage pipes ought to be covered with insulation in order to prevent dew condensation because of the surface air into, which causes water dripping phenomenon.
4, the call: Connection wire cabinet air conditioner normally takes self, and their connection method varies randomly different. Therefore, in the specific wiring operation, what strict accordance with product instructions, wire leads among the unit when within just a window over apron with dedicated wiring insulation holes, many wires to create tighten clamp unit and a soft belt wrap fixed.
For the above safety and correct through test, fan coil you'll be able to conduct a shot run.